2018-01-06 16:51:18 +00:00
|
|
|
From 8c6956686606b9c3661e74a410c8cb2fc276c5ee Mon Sep 17 00:00:00 2001
|
|
|
|
|
Message-Id: <8c6956686606b9c3661e74a410c8cb2fc276c5ee.1514959852.git.jan.steffens@gmail.com>
|
|
|
|
|
In-Reply-To: <fb89d912d5f7289d3a922c77b671e36e1c740f5e.1514959852.git.jan.steffens@gmail.com>
|
|
|
|
|
References: <fb89d912d5f7289d3a922c77b671e36e1c740f5e.1514959852.git.jan.steffens@gmail.com>
|
2017-12-23 16:43:40 +00:00
|
|
|
From: Benjamin Poirier <bpoirier@suse.com>
|
|
|
|
|
Date: Mon, 11 Dec 2017 16:26:40 +0900
|
2018-01-06 16:51:18 +00:00
|
|
|
Subject: [PATCH 2/7] e1000e: Fix e1000_check_for_copper_link_ich8lan return
|
2017-12-23 16:43:40 +00:00
|
|
|
value.
|
|
|
|
|
|
|
|
|
|
e1000e_check_for_copper_link() and e1000_check_for_copper_link_ich8lan()
|
|
|
|
|
are the two functions that may be assigned to mac.ops.check_for_link when
|
|
|
|
|
phy.media_type == e1000_media_type_copper. Commit 19110cfbb34d ("e1000e:
|
|
|
|
|
Separate signaling for link check/link up") changed the meaning of the
|
|
|
|
|
return value of check_for_link for copper media but only adjusted the first
|
|
|
|
|
function. This patch adjusts the second function likewise.
|
|
|
|
|
|
|
|
|
|
Reported-by: Christian Hesse <list@eworm.de>
|
|
|
|
|
Reported-by: Gabriel C <nix.or.die@gmail.com>
|
|
|
|
|
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198047
|
|
|
|
|
Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up")
|
|
|
|
|
Tested-by: Christian Hesse <list@eworm.de>
|
|
|
|
|
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
|
|
|
|
|
---
|
|
|
|
|
drivers/net/ethernet/intel/e1000e/ich8lan.c | 11 ++++++++---
|
|
|
|
|
1 file changed, 8 insertions(+), 3 deletions(-)
|
|
|
|
|
|
|
|
|
|
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
|
|
|
|
|
index d6d4ed7acf031172..31277d3bb7dc1241 100644
|
|
|
|
|
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
|
|
|
|
|
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
|
|
|
|
|
@@ -1367,22 +1367,25 @@ static s32 e1000_disable_ulp_lpt_lp(struct e1000_hw *hw, bool force)
|
|
|
|
|
* Checks to see of the link status of the hardware has changed. If a
|
|
|
|
|
* change in link status has been detected, then we read the PHY registers
|
|
|
|
|
* to get the current speed/duplex if link exists.
|
|
|
|
|
+ *
|
|
|
|
|
+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
|
|
|
|
|
+ * up).
|
|
|
|
|
**/
|
|
|
|
|
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
|
|
|
|
|
{
|
|
|
|
|
struct e1000_mac_info *mac = &hw->mac;
|
|
|
|
|
s32 ret_val, tipg_reg = 0;
|
|
|
|
|
u16 emi_addr, emi_val = 0;
|
|
|
|
|
bool link;
|
|
|
|
|
u16 phy_reg;
|
|
|
|
|
|
|
|
|
|
/* We only want to go out to the PHY registers to see if Auto-Neg
|
|
|
|
|
* has completed and/or if our link status has changed. The
|
|
|
|
|
* get_link_status flag is set upon receiving a Link Status
|
|
|
|
|
* Change or Rx Sequence Error interrupt.
|
|
|
|
|
*/
|
|
|
|
|
if (!mac->get_link_status)
|
|
|
|
|
- return 0;
|
|
|
|
|
+ return 1;
|
|
|
|
|
|
|
|
|
|
/* First we want to see if the MII Status Register reports
|
|
|
|
|
* link. If so, then we want to get the current speed/duplex
|
|
|
|
|
@@ -1613,10 +1616,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
|
|
|
|
|
* different link partner.
|
|
|
|
|
*/
|
|
|
|
|
ret_val = e1000e_config_fc_after_link_up(hw);
|
|
|
|
|
- if (ret_val)
|
|
|
|
|
+ if (ret_val) {
|
|
|
|
|
e_dbg("Error configuring flow control\n");
|
|
|
|
|
+ return ret_val;
|
|
|
|
|
+ }
|
|
|
|
|
|
|
|
|
|
- return ret_val;
|
|
|
|
|
+ return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
|
|
|
|
|
--
|
|
|
|
|
2.15.1
|
|
|
|
|
|
