forked from AUR/linux-vfio
73 lines
2.9 KiB
Diff
73 lines
2.9 KiB
Diff
|
From fb08717dc5ecf3ada73f93663b528d9d4ce4380b Mon Sep 17 00:00:00 2001
|
||
|
|
Message-Id: <fb08717dc5ecf3ada73f93663b528d9d4ce4380b.1524129246.git.jan.steffens@gmail.com>
|
||
|
|
In-Reply-To: <ff9d06de19e83c0c5a00a4d46376b4d1032c4f99.1524129246.git.jan.steffens@gmail.com>
|
||
|
|
References: <ff9d06de19e83c0c5a00a4d46376b4d1032c4f99.1524129246.git.jan.steffens@gmail.com>
|
||
|
|
From: Igor Russkikh <igor.russkikh@aquantia.com>
|
||
|
|
Date: Wed, 11 Apr 2018 15:23:24 +0300
|
||
|
|
Subject: [PATCH 6/6] net: aquantia: Regression on reset with 1.x firmware
|
||
|
|
|
||
|
|
On ASUS XG-C100C with 1.5.44 firmware a special mode called "dirty wake"
|
||
|
|
is active. With this mode when motherboard gets powered (but no poweron
|
||
|
|
happens yet), NIC automatically enables powersave link and watches
|
||
|
|
for WOL packet.
|
||
|
|
This normally allows to powerup the PC after AC power failures.
|
||
|
|
|
||
|
|
Not all motherboards or bios settings gives power to PCI slots,
|
||
|
|
so this mode is not enabled on all the hardware.
|
||
|
|
|
||
|
|
4.16 linux driver introduced full hardware reset sequence
|
||
|
|
This is required since before that we had no NIC hardware
|
||
|
|
reset implemented and there were side effects of "not clean start".
|
||
|
|
|
||
|
|
But this full reset is incompatible with "dirty wake" WOL feature
|
||
|
|
it keeps the PHY link in a special mode forever. As a consequence,
|
||
|
|
driver sees no link and no traffic.
|
||
|
|
|
||
|
|
To fix this we forcibly change FW state to idle state before doing
|
||
|
|
the full reset. This makes FW to restore link state.
|
||
|
|
|
||
|
|
Fixes: c8c82eb net: aquantia: Introduce global AQC hardware reset sequence
|
||
|
|
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
|
||
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
|
---
|
||
|
|
.../aquantia/atlantic/hw_atl/hw_atl_utils.c | 16 ++++++++++++++++
|
||
|
|
1 file changed, 16 insertions(+)
|
||
|
|
|
||
|
|
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
|
||
|
|
index d3b847ec7465..c58b2c227260 100644
|
||
|
|
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
|
||
|
|
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
|
||
|
|
@@ -48,6 +48,8 @@
|
||
|
|
#define FORCE_FLASHLESS 0
|
||
|
|
|
||
|
|
static int hw_atl_utils_ver_match(u32 ver_expected, u32 ver_actual);
|
||
|
|
+static int hw_atl_utils_mpi_set_state(struct aq_hw_s *self,
|
||
|
|
+ enum hal_atl_utils_fw_state_e state);
|
||
|
|
|
||
|
|
int hw_atl_utils_initfw(struct aq_hw_s *self, const struct aq_fw_ops **fw_ops)
|
||
|
|
{
|
||
|
|
@@ -247,6 +249,20 @@ int hw_atl_utils_soft_reset(struct aq_hw_s *self)
|
||
|
|
|
||
|
|
self->rbl_enabled = (boot_exit_code != 0);
|
||
|
|
|
||
|
|
+ /* FW 1.x may bootup in an invalid POWER state (WOL feature).
|
||
|
|
+ * We should work around this by forcing its state back to DEINIT
|
||
|
|
+ */
|
||
|
|
+ if (!hw_atl_utils_ver_match(HW_ATL_FW_VER_1X,
|
||
|
|
+ aq_hw_read_reg(self,
|
||
|
|
+ HW_ATL_MPI_FW_VERSION))) {
|
||
|
|
+ int err = 0;
|
||
|
|
+
|
||
|
|
+ hw_atl_utils_mpi_set_state(self, MPI_DEINIT);
|
||
|
|
+ AQ_HW_WAIT_FOR((aq_hw_read_reg(self, HW_ATL_MPI_STATE_ADR) &
|
||
|
|
+ HW_ATL_MPI_STATE_MSK) == MPI_DEINIT,
|
||
|
|
+ 10, 1000U);
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
if (self->rbl_enabled)
|
||
|
|
return hw_atl_utils_soft_reset_rbl(self);
|
||
|
|
else
|
||
|
|
--
|
||
|
|
2.17.0
|
||
|
|
|