179 lines
6.6 KiB
Markdown
179 lines
6.6 KiB
Markdown
# GPU-Jupyter
|
|
#### Leverage Jupyter Notebooks with the power of your NVIDIA GPU and perform GPU calculations using Tensorflow and Pytorch in collaborative notebooks.
|
|
|
|
|
|
|
|
First of all, thanks to [hub.docker.com/u/jupyter](https://hub.docker.com/u/jupyter)
|
|
for creating and maintaining a robost Python, R and Julia toolstack for Data Analytics/Science
|
|
applications. This project uses the NVIDIA CUDA image as a basis image and installs their
|
|
toolstack on top of it to enable GPU calculations in the Jupyter notebooks.
|
|
|
|
## Contents
|
|
|
|
1. [Requirements](#requirements)
|
|
2. [Quickstart](#quickstart)
|
|
3. [Tracing](#tracing)
|
|
4. [Deployment](#deployment-in-the-docker-swarm)
|
|
5. [Configuration](#configuration)
|
|
6. [Issues and Contributing](#issues-and-contributing)
|
|
|
|
|
|
## Requirements
|
|
|
|
1. Install [Docker](https://www.docker.com/community-edition#/download) version **1.10.0+**
|
|
and [Docker Compose](https://docs.docker.com/compose/install/) version **1.6.0+**.
|
|
2. A NVIDIA GPU
|
|
3. Get access to use your GPU via the CUDA drivers, check out this
|
|
[medium article](https://medium.com/@christoph.schranz/set-up-your-own-gpu-based-jupyterlab-e0d45fcacf43).
|
|
The CUDA toolkit is not required on the host system, as it will be deployed
|
|
in [NVIDIA-docker](https://github.com/NVIDIA/nvidia-docker).
|
|
4. Clone the Repository or pull the image from
|
|
[Dockerhub](https://hub.docker.com/repository/docker/cschranz/gpu-jupyter):
|
|
```bash
|
|
git clone https://github.com/iot-salzburg/gpu-jupyter.git
|
|
cd gpu-jupyter
|
|
```
|
|
|
|
## Quickstart
|
|
|
|
First of all, it is necessary to generate the `Dockerfile` based on the latest toolstack of
|
|
[hub.docker.com/u/jupyter](https://hub.docker.com/u/jupyter).
|
|
As soon as you have access to your GPU locally (it can be tested via a Tensorflow or PyTorch
|
|
directly on the host node), you can run these commands to start the jupyter notebook via
|
|
docker-compose (internally):
|
|
|
|
```bash
|
|
./generate_Dockerfile.sh
|
|
docker build -t gpu-jupyter .build/
|
|
docker run -d -p [port]:8888 gpu-jupyter
|
|
```
|
|
|
|
Alternatively, you can configure the environment in `docker-compose.yml` and run
|
|
this to deploy the `GPU-Jupyter` via docker-compose (under-the-hood):
|
|
|
|
```bash
|
|
./generate_Dockerfile.sh
|
|
./start-local.sh -p 8888 # where -p stands for the port of the service
|
|
```
|
|
|
|
Both options will run *GPU-Jupyter* by default on [localhost:8888](http://localhost:8888) with the default
|
|
password `asdf`.
|
|
|
|
|
|
## Tracing
|
|
|
|
With these commands we can see if everything worked well:
|
|
```bash
|
|
docker-compose ps
|
|
docker logs [service-name]
|
|
```
|
|
|
|
In order to stop the local deployment, run:
|
|
|
|
```bash
|
|
./stop-local.sh
|
|
```
|
|
|
|
|
|
## Deployment in the Docker Swarm
|
|
|
|
A Jupyter instance often requires data from other services.
|
|
If that data-source is containerized in Docker and sharing a port for communication shouldn't be allowed, e.g., for security reasons,
|
|
then connecting the data-source with *GPU-Jupyter* within a Docker Swarm is a great option!
|
|
|
|
### Set up Docker Swarm and Registry
|
|
|
|
This step requires a running [Docker Swarm](https://www.youtube.com/watch?v=x843GyFRIIY) on a cluster or at least on this node.
|
|
In order to register custom images in a local Docker Swarm cluster,
|
|
a registry instance must be deployed in advance.
|
|
Note that the we are using the port 5001, as many services use the default port 5000.
|
|
|
|
```bash
|
|
sudo docker service create --name registry --publish published=5001,target=5000 registry:2
|
|
curl 127.0.0.1:5001/v2/
|
|
```
|
|
This should output `{}`. \
|
|
|
|
Afterwards, check if the registry service is available using `docker service ls`.
|
|
|
|
|
|
### Configure the shared Docker network
|
|
|
|
Additionally, *GPU-Jupyter* is connected to the data-source via the same *docker-network*. Therefore, This network must be set to **attachable** in the source's `docker-compose.yml`:
|
|
|
|
```yml
|
|
services:
|
|
data-source-service:
|
|
...
|
|
networks:
|
|
- default
|
|
- datastack
|
|
...
|
|
networks:
|
|
datastack:
|
|
driver: overlay
|
|
attachable: true
|
|
```
|
|
In this example,
|
|
* the docker stack was deployed in Docker swarm with the name **elk** (`docker stack deploy ... elk`),
|
|
* the docker network has the name **datastack** within the `docker-compose.yml` file,
|
|
* this network is configured to be attachable in the `docker-compose.yml` file
|
|
* and the docker network has the name **elk_datastack**, see the following output:
|
|
```bash
|
|
sudo docker network ls
|
|
# ...
|
|
# [UID] elk_datastack overlay swarm
|
|
# ...
|
|
```
|
|
The docker network name **elk_datastack** is used in the next step as a parameter.
|
|
|
|
### Start GPU-Jupyter in Docker Swarm
|
|
|
|
Finally, *GPU-Jupyter* can be deployed in the Docker Swarm with the shared network, using:
|
|
|
|
```bash
|
|
./generate_Dockerfile.sh
|
|
./add-to-swarm.sh -p [port] -n [docker-network] -r [registry-port]
|
|
# e.g. ./add-to-swarm.sh -p 8848 -n elk_datastack -r 5001
|
|
```
|
|
where:
|
|
* **-p:** port specifies the port on which the service will be available.
|
|
* **-n:** docker-network is the name of the attachable network from the previous step, e.g., here it is **elk_datastack**.
|
|
* **-r:** registry port is the port that is published by the registry service, see [Set up Docker Swarm and Registry](set-up-docker-swarm-and-registry).
|
|
|
|
Now, *gpu-jupyter* will be accessable here on [localhost:8848](http://localhost:8848) with the default password `asdf` and shares the network with the other data-source, i.e., all ports of the data-source will be accessable within *GPU-Jupyter*, even if they aren't routed it the source's `docker-compose` file.
|
|
|
|
Check if everything works well using:
|
|
```bash
|
|
sudo docker service ps gpu_gpu-jupyter
|
|
docker service ps gpu_gpu-jupyter
|
|
```
|
|
|
|
In order to remove the service from the swarm, use:
|
|
```bash
|
|
./remove-from-swarm.sh
|
|
```
|
|
|
|
## Configuration
|
|
|
|
Please set a new password using `src/jupyter_notebook_config.json`.
|
|
Therefore, hash your password in the form (password)(salt) using a sha1 hash generator, e.g., the sha1 generator of [sha1-online.com](http://www.sha1-online.com/).
|
|
The input with the default password `asdf` is appended by a arbitrary salt `e49e73b0eb0e` to `asdfe49e73b0eb0e` and should yield the hash string as shown in the config below.
|
|
**Never give away your own unhashed password!**
|
|
|
|
Then update the config file as shown below and restart the service.
|
|
|
|
```json
|
|
{
|
|
"NotebookApp": {
|
|
"password": "sha1:e49e73b0eb0e:32edae7a5fd119045e699a0bd04f90819ca90cd6"
|
|
}
|
|
}
|
|
```
|
|
|
|
|
|
## Issues and Contributing
|
|
|
|
* Please let us know by [filing a new issue](https://github.com/iot-salzburg/gpu-jupyter/issues/new)
|
|
* You can contribute by opening a [pull request](https://help.github.com/articles/using-pull-requests/)
|